Radiometric thermal inspection of roofs, cladding, electrical, solar and process equipment for preventative maintenance and early fault detection.
A failing connection, a wet section of roof insulation, a bypassing steam trap or a dead solar string all show up as a temperature difference long before they show up as an outage, a leak or a lost month of generation. A thermal survey finds them in one pass, from the air, without isolating anything.
Every thermal frame is captured alongside a visual frame at the same moment, so the anomaly is located exactly and there is no argument about what was seen.
Every anomaly delivered as a radiometric thermal image beside the matching visual image, with temperatures and location.
A list of every thermal anomaly found, where it is and what the images show, in a format your maintenance system can take. Your engineers decide the action.
The raw thermal files so your engineers can re-analyse temperatures and emissivity themselves.
On recurring surveys, a side-by-side of this pass against the last so trends are obvious.
Electrical and process equipment under normal load, and roofs in the evening after a warm day so wet insulation stands out. We plan the flight around the asset.
Radiometric sensors give calibrated readings. We report emissivity and conditions with every image so the numbers can be trusted and repeated.
Yes for open structures and large sheds where the aircraft can be flown safely. Confined or congested areas are assessed case by case.
Site induction, a site contact on the day and an idea of which assets matter most. Load data or drawings help but are not essential.
Tell us the asset and we will tell you what a thermal survey would show you and what it costs.
